-|| Al-Khatam Group ||-

- Quality Forks --> Quality Forks Claddings

Brass and stainless steel cladding

According to the application, legal demands need to be fulfilled:

Hygiene demands in the food and chemical industry
Safety laws for transport in hazardous areas

For this, brass- or stainless steel cladding is the perfect solution. A fixed cladding of 4 mm is made on the fork blade or – if desired – on the whole fork.

Advantagesv

Simple cleaning
Safety against dirt and bacteria
Spark proof when contacting the load or the ground

Thus, safety risks can be avoided efficiently.

VETTER GrippFix and polyurethane cladding

Very often, delicate goods need to be transported directly on the forks e.g painted steel parts, stainless steel or plastic products, furniture, flagstones etc.

When using standard forks, parts can easily become scratched or damaged.

GrippFix or polyurethane cladding minimizes such damage. Both materials are extremely resistant to cutting or abrasion and furthermore prevent the goods from sliding off (GrippFix even when it is wet!). Also noise from the transport of metal goods can be reduced.

You may choose between a fixed (bonded) cladding on the fork resp. fork extension and a removeable protective shoe.

Cladding thickness:
Fixed GrippFix cladding: approx. 8 mm
Fixed polyurethane cladding: approx. 10 mm
Cladding on protective shoe: approx. 12 mm

VETTER DuplEx cladding

A further option for high safety is DuplEx cladding, using 2 different materials:

An outer material as well as
a different coloured inner material at the underside of the fork

Wear mainly occurs underneath the forks. As soon as the cladding is reduced to the minimum 1 mm thick, the fork needs to be replaced and the cladding renewed (EN 1755).

Wear indication at a glace

Previously, wear could not be determined visibly. Regular, daily measuring is time consuming and requires special measuring tools and knowledge.

This is the significant advantage of the DuplEx cladding. As soon as the outer cladding is worn away, the inner cladding becomes visible. By using materials of different colours (e.g. brass / stainless steel), wear can be determined immediately. A real plus for safety and convenience

- Contact Us Now



<< Prev	Next >>

Content on this page requires a newer version of Adobe Flash Player.